GN-56U8BX

  1. Your position
  2. Home Page
  3. GLONASS Module
  4. GNSS L1
  5. GN-56U8BX
GN-56UB9
GN-56UB9

GN-56UB9

GN-56UB8 Featuring a single die solution, low power consumption and low costs, the GN-56UB8-X are multi-GNSS (GPS BeiDou , GLONASS ,SBAS and QZSS) positioning Module developed to meet the requirements

  • Model:： GN-56UB8X
  • GNSSMode:： GPS+GLONASS+GALILEO GNSS L1+5883
  • Working level：： UART,RS232, CAN
  • Refresh rate：： 1HZ（default） can be set 5-15Hz
  • Operating voltage(V)：： 5.0V
  • Operating current：： 55mA
  • Connector type：： 1.25 6PIN
  • size(mm)：： φ56 x9.20mm
  • Weight(g)：： 65g
  • Brand：： TOPGNSS
  • NMEA Message： UBX,NMEA0183
  • Receiving channel： 72
Contact Us For A Quick Quote !



GN-56UB8 Featuring a single die solution, low power consumption and low costs, the GN-56UB8-X are multi-GNSS (GPS BeiDou , GLONASS ,SBAS and QZSS) positioning Module developed to meet the requirements of an extensive range of applications and end-products. Based on the high performance UBX-M8030 position   engine ,these receivers provide exceptional sensitivity and acquisition times and interference suppression

measures enable reliable positioning even in difficult signal conditions.

1.3 Product Features

• UBX-M8030 high performance GPS/GNSS Chips:

• over 2 million effective correlators

• 72 channels in Search mode

• cold start acquisition sensitivity of - 148 dBm and - 167 dBm tracking sensitivity

• up to 10 Hz navigation update rate

• Supports GPS, QZSS, GLONASS , BeiDou and is ready for Galileo

• Supports AGPS

•  Integrated TCXO,LNA,SAW,RTC

• Compact size (φ56mm x 8.90mm ) suitable for space-sensitive application

• Support standard NMEA 0183,UBX ， RTCM

• This module can be equipped with QMC5883,MCU, Barometer and so on.


Product Application

•  Handheld GPS receiver application

•  Ideal for PDA, Pocket PC

• Geographic Surveying

• Sports and Recreation

•  Marine Navigation, Fleet Management



• Automotive application

• Car navigation and tracking

• AVL and Location-Based Services

• Timing application

• UAV




TOPGNSS GNSS Module GN-56UB8X Performance

GNSS CHIP

M8030-KT

frequency

L1, 1575.42MHz

protocol

NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS,

EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode
Default:GGA,GSA,GSV,RMC Support:VTG,GLL,TXT binary and NMEA Command

Available baud rate

(Default 9600) Can be set 1200,4800,19200,38400,57600,115200 bps

Receiving channel

72

Sensitivity

Tracking sensitivity:-160Dbm Capture sensitivity:-157dBm

Cold start

29s average

Warm start time

28s average

Hot start time

1s average

Precision

HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average
Velocity: 0.1 m/s
Timepulse signal: RMS 30 ns

maximum height

18000  Meter

Maximum speed

515 m/s

Maximum acceleration

4G

update frequency

1-10Hz(default1HZ

A-GPS

AssistNow on-line and off-line

Working output level

output level

Output TTL level

Physical characteristics

PIN

6 pin 1.25 pitch  SCL,CAN/RXD CANH/TXD

GND, VCC3.3-5V.SDA

Dimensions

30mm * 30 mm * 10.2mm

Operating Voltage

3.3V-5.0VDC ±5%

weight

8.5g

Connector form

1.25 6 PIN

Cable length:

15 CM

Operating temperature

-40 to 85

Storage temperature

-40 to 85


The GN-56UB8 X GPS module can be selcted according to the needs of the corresponding interface

output side and additional sensors, there are mainly the following options.

NAME

TTL

CAN

QMC5883

MS5611

STM32F103C8T6

GN-56UB8-C

NC

√

√

NC

√

GN-56UB8-T

√

NC

√

NC

NC

GN-56UB8-M

√

NC

√

NC

√

GN-56UB8-S

√

NC

√

√

NC


首页
产品
联系